Advanced Soft Flatsheet Mbr Membrane for Industrial and Hospital Wastewater Treatment Easy Maintenance and Operation

• Customization: Available
• Membrane Type: Plate and frame
• Type: UF
• Model NO.: XYD-M-001
• Productivity: 3000L/Hour
• Composition: 2-Layer Diaphragm + 2-Layer Flow + Membrane
• Warranty: 2 Year
• Shape: Square Fillet
• Water Pipe: DN50
• Size: 1320X860X2000mm
• Material: PVDF PTFE
• Aperture: 0.1-0.4um
• Weight: 270kg
• Name: Mbr Softener Flatsheet Membrane
• Welding Method: Ultrasonic Seal Welding
• Aeration Pipe: DN65
• Model: Ipuf9-18e3
• Machinery Test Report: Provided
• Transport Package: Wooden Box
• Specification: Flat sheet MBR
• Trademark: NEW YUDA
• Origin: Guangxi, China
• HS Code: 8421219090
• Production Capacity: 800 Sets Per Month
• Package Size: 100.00cm * 50.00cm * 30.00cm
• Package Gross Weight: 29.000kg

Product Description

Products Description

Introduction to Membrane Technology

Membrane liquid separation technology can generally be divided into four categories based on different operating pressures and the average pore size of the membrane used: microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO), and their filtration accuracy is increasing in the above order.

Microfiltration (MF)
Microfiltration can intercept particles between 0.1 and 1 micrometer, and the microfiltration membrane allows large organic molecules and soluble solids (inorganic salts) to pass through, but can block the passage of suspended solids, bacteria, some viruses, and large-scale colloids.

Ultrafiltration (UF)
Ultrafiltration can intercept particles and impurities between 0.002 and 0.1 microns. The ultrafiltration membrane allows small molecule substances and soluble solids (inorganic salts) to pass through, but it will effectively block colloids, proteins, microorganisms, and large molecule organic matter.

Nanofiltration (NF)
Nanofiltration is a special and promising type of separation membrane, named after its ability to retain substances of approximately 1 nanometer (0.001 micrometer) in size. The operating range of nanofiltration is between ultrafiltration and reverse osmosis, with a molecular weight of approximately 200-400 for organic matter and a ability to retain soluble salts of 20-98%. The removal rate of monovalent anionic salt solutions is lower than that of high valent anionic salt solutions, such as sodium chloride and calcium chloride, which have a removal rate of 20-80%, while the removal rate of magnesium sulfate and sodium sulfate is 90-98%. Nanofiltration membranes are generally used to remove organic matter and chromaticity from surface water, remove hardness and radioactive radium from well water, partially remove soluble salts, concentrate food, and separate useful substances from pharmaceuticals.

Reverse Osmosis (RO)
Reverse osmosis is the most precise membrane liquid separation technology, which can block all soluble salts and organic matter with a molecular weight greater than 100, but allows water molecules to pass through. The desalination rate of cellulose acetate reverse osmosis membrane can generally be greater than 95%, and the desalination rate of reverse osmosis composite membrane is generally greater than 98%. They are widely used in seawater and brackish water desalination, boiler feedwater, industrial pure water and electronic grade ultra pure water preparation, drinking pure water production, wastewater treatment and special separation processes. The use of reverse osmosis before ion exchange can significantly reduce operating costs and wastewater discharge.
 

Product name	MBR Softener Flake Membrane
Materials	PVDF PTFE
Color	White
Size	1320x860x2000mm
MOQ	5PCS

Details Images

 

 

 

 

 

Characteristics of membrane elements:

1) Small Square Shape : High utilization rate of membrane.
2)  Intermediate water production: short flow channel, high flux, low transmembrane pressure difference, high water production efficiency, and obvious energy consumption advantages.
3) PP board as support: maintains the flatness of the membrane, and in a fully aerated state, it swings greatly without being easily broken.


 Membrane Module
 Membrane module consists of a membrane element, a central water pipe, a sealing locking plate, two end plates, a compression sealing cover, a locking nut and an O-ring, and the specifications of the membrane support are shown in Table 2. 

Table 2 Common Membrane elements Specifications

Name	Size,mm	Area, m2
Standard membrane module	1250×256×256	12.5
Customized membrane module	642×256×256	6.25

Characteristics of membrane modules
1 ) can be customized design and manufacture, can be used in special occasions, a wide range of applications.
2 ) The patented lock piece design provides a reasonable inlet flow channel and realizes the on-line cleaning of the membrane.
3 ) The two-end plate design facilitates the assembly of membrane module and provides support for the superposition of membrane module.
4 ) Easy disassembly and quick replacement.

Table 3  Common specifications of membrane stacks

Name	Spec.	Size, mm	Area, m2
IPUF9-4E2	2×2	1310×670×940	50
IPUF9-12E2	2×6	1320×670×2000	150
IPUF9-9E3	3×3	1310×950×1200	112.5
IPUF9-18E3	3×6	1320×950×2010	225
IPUF9-24E4	4×6	1320×1230×2010	300
IPUF9-32E4	4×8	1320×1230×2520	400

 

Company Profile

Certifications

Exhibition

Product packaging

FAQ

A) How could I get a sample?

Sample are available, but please afford sample costs and express fee.

 

B) Sample lead time?

Existing items: Within 7-10 days.

 

C) Do you offer OEM service and marked our logo on the products?

Yes, We offer OEM services.

 

D) What is the delivery time?

Normally, delivery time is 20-30days after order.

 

E) How to guarantee the quality of your products?

1) We have strict quality control system, every product has been strictly inspect and stamped QC psssed before shipping out.

2) Strictsampling inspection on products before shipment and intact product packaging ensured.